
TSB orders more training following incident involving plane in Calgary
CTV
The Transportation Safety Board says an incident that involved a Westjet plane hitting the runway in Calgary earlier this year was connected to an issue with pilot training on a particular model of aircraft.
The Transportation Safety Board (TSB) says an incident that involved a Westjet plane hitting the runway in Calgary earlier this year was connected to an issue with pilot training on a particular model of aircraft.
At approximately 2:30 p.m. on April 13, a DHC-8-402 aircraft, operated by Westjet Encore, came in for a landing at Calgary International Airport.
In a report, the TSB said the aft fuselage of the plane struck the runway, causing damage to the belly of the aircraft.
No one was injured and all passengers deplaned normally, but the plane was taken out of service following the incident.
An investigation was launched after the incident, which looked at the flight crew, weather and the plane itself to explain what happened.
As a result, the TSB found the issue was connected to a series of incidents involving DHC-8 aircraft that were first reported more than 20 years ago.
In an online report, the TSB said the first officer on the flight switched off the autopilot and took the controls at 500 feet above ground level.

At a large Toronto supermarket known for its Iranian and Middle Eastern staples, shelves remain full of customers’ favourites—at least for now. But the store’s longtime operator warns that could change later this year as the war in the Middle East disrupts some food supplies and drives up global prices.












